Doll Round-Up: Madeline Hatter Ever After High First Chapter Doll with Varying Skin Tone and Doll Wig Making for MGA Moxie Girlz Dolls

Madeline Hatter, First Chapter Doll - The Tanned Version 

There have been a few new additions to the doll house this past week. In the lot of pre-loved dolls that moved in was a Madeline Hatter Ever After High First Chapter doll. I already have this Madeline doll in the collection (the joys of buying used lots) and wasn't paying too much attention to her initially. 

Madeline Hatter Ever After High First Chapter Doll in Custom Picot Dress 

However, upon closer inspection and when compared to the other Madeline doll in my collection, the new Madeline appears to have a somewhat darker complexion. In fact, she looks like she has been to the tanning salon when comparing her skin tone to my other Ever After High Madeline Hatter First Chapter doll.

Madeline Hatter Ever After High First Chapter Doll (tanned skin tone) 

Madeline Hatter Ever After High First Chapter Doll (tanned skin tone) 

Madeline Hatter Ever After High First Chapter Doll (tanned skin tone) 

There are also subtle differences to the way her eyes are painted. For want of a better description, it appears that her green eyes are more vivid as a result of the darker skin tone and a larger highlight underneath her pupil, whilst the other Madeline seems to have an altogether matte, flesh-coloured complexion and a less playful expression.   

Madeline Hatter Ever After High First Chapter Doll: Differing Complexions and Varying Make-Up 

Monster High: Knee Highs

Free Monster High Knee High Stocking Knitting Pattern

After a pair of Monster High doll leggings and tights, it was high time to knit a pair of knee high stockings for the Monsters Highs.

Monster High Doll Knee High Stocking Knitting Pattern

The knee high stockings are knitted seamlessly from the top-down and finished off at the toes with kitchener stitch.

Monster High Doll - Knee High Stocking Knitting Pattern

Free Knitting Pattern - Monster High Doll Tights

Having recently released a Monster High doll leggings pattern, I wanted to develop this project further and adapt the leggings pattern into Monster High doll tights. The result of my experiment is this pattern.

The tights are knitted seamlessly from the top-down and finished off at the toes with kitchener stitch.

For the tights in the images I used Madelinetosh Tosh Merino Light sock yarn in Victorian Gothic, but the pattern should work with any 4 ply sock yarn. 

To achieve snug-fitting tights, I recommend checking the fit on the doll frequently to see whether it's necessary to insert additional knit rows between the calf-decreases.  

Monster High Tights Knitting Pattern

Monster High Doll Tights

Pattern Notes

Materials and Tools

• app 10 - 15g of 4 ply Sock Yarn 

• 2 - 3mm Double-Pointed Needles 

• 4 Stitch Markers

• Scissors

• Safety Pin (x 2) or Scrap Yarn (in contrasting colour)

• Darning Needle (for kitchener stitch), Crochet Hook (for sewing in ends and tidying up)

Monster High Tights Knitting Pattern

Cast on 24 stitches.

Row 1: k1, p1 to end of row.

Row 2 - 4: Divide stitches evenly on 3 double-pointed needles and join in the round, placing a stitch marker at the beginning of the round. Continue in k1, p1 ribbing for another 3 rounds.

Waist Increases: 

Row 5: SM (slip marker), k1, PM (place marker), kfb, k8, kfb, pm, k1, pm, kfb, k10 to last stitch, kfb (28 stitches)

Row 6 - 8: Repeat above increase row three times until stitch count totals 40 stitches.

Continue knitting 5 - 8 rounds in stockinette stitch until the piece has reached the desired length and fits comfortably around the dolls hips. 

Dividing for the legs

Removing markers, at the beginning of the next round place the first 20 stitches onto waste yarn. 

Join the remainder of the stitches in the round, placing a marker at the beginning of the round.

Row 11: sm (slip marker), kfb, knit to last stitch, kfb (22 stitches)

Row 12: k all stitches

Thigh Decreases

Row 13: sl1, k1, psso, k to last 2 stitches, k2tog (20 stitches)

Row 14: k all stitches

Row 15: sl1, k1, psso, k to last 2 stitches, k2tog (18 stitches)

Row 16: k all stitches

Row 17: sl1, k1, psso, k to last 2 stitches, k2tog (16 stitches)

Row 18: k all stitches

Row 19: sl1, k1, psso, k to last 2 stitches, k2tog (14 stitches)

Row 20 - Row 57: continue knitting in stockinette stitch for 38 rows (knitting throughout) until the piece has reached the dolls calf.

Monster High Tights Knitting Pattern

Calf Decreases 

During this section, it's advisable to keep checking the fit on the doll. If you notice that you require more rows for added length, insert these between the decrease rows after checking the fit.

Row 58: k to last 4 sts before end of round, sl1, k1, psso, k2tog (12 stitches)

Row 59 - Row 63: k 4 rows in stockinette stitch 

Row 64: k to last 4 sts before end of round, sl1, k1, psso, k2tog (10 stitches)

Row 65 - Row 68: knit 4 rows in stockinette stitch 

Row 69: k to last 4 sts before end of round, sl1, k1, psso, k2tog (8 stitches)

Row 70 - Row 73: knit 4 rows in stockinette stitch 

Row 74: k to last 4 sts before end of round, sl1, k1, psso, k2tog (6 stitches)

Row 75 to bind off: continue knitting in stockinette stitch until the knitted fabric almost entirely engulfs the doll's foot as shown in the picture below.

When the doll's foot is comfortably covered by the knitted fabric, switch to two double-pointed knitting needles and align them parallel to one another, preparing to bind the last remaining stitches off in kitchener stitch.   

Ready for kitchener stitch bind off 

More in-progress photos of the tights are available here. You may find them helpful to show the bind-off.

When the bind off is complete, insert the needle at the corner of the toes and pull the yarn through to the inside to achieve a bump-free finish. 

The Second Leg 

Proceed to knit the second leg, dividing stitches held on scrap yarn evenly on three double-pointed needles. Using the m1 increase method, pick up 1 stitch at the beginning and at the end of the round to ensure a closed up seam. 

Mark the beginning of the round and start knitting the second leg, following the instructions above. Ensure that the thigh decreases are positioned at the inside of the leg and the calf decreases are positioned at the back of the doll's leg.

When the tights are complete, block the finished object by leaving it fitted on the doll. This will ensure that the fabric is nicely stretched into shape.  

Monster High Tights Knitting Pattern

Monster High Tights Knitting Pattern

Should you require pattern support, please feel free to contact me via Ravelry, Twitter, by e-mail or leave a comment below.

This pattern is for personal use only and may not be reproduced for commercial purposes without permission. Neither may you sell any items made from the directions in this pattern.

© 2020 Clarice Asquith. All rights reserved. http://makedoandmendnovice.blogspot.com

Knitted Tights for Monster High Dolls

After the release of my leggings knitting pattern for Monster High dolls, I decided to adapt my pattern for a pair of closed-up, snug-fitting knitted Monster High tights. 

These are knitted on tiny needles and there is quite a bit of shaping happening before the piece is finished with a kitchener stitch bind-off. 

I am really pleased with the result so far and will be releasing my pattern notes on the blog very soon. In the mean time, here are some in-progress photos of the project, which were taken whilst I was completing the first leg of the tights: 

Monster High Doll - Tights Knitting in Progress

My Monster High tights knitting pattern is now available here.

Big Jim Action Figures - Free Pants Knitting Pattern

Boxer Shorts for Big Jim Action Figures

Having crafted a lot for my collection of Monster High fashion dolls lately (more here), I decided it was time to branch out and design some pants / boxer shorts for Winnetou, a Big Jim Action figure and by far the oldest doll in my collection.

Big Jim Action Figure (Winnetou / Geronimo) by Mattel ca 1970s / 1980s

With boys being the obvious target market, Big Jim action figures were produced by Mattel during the 1970s up to the mid-1980s, when production of the line eventually seized. As you can see from the picture above, the dolls don't have a proper head, yet come with a variety of other features, including a bulging biceps and the legendary push button in their backs, enabling the characters to execute what is supposed to resemble 'a karate chop move'. For a demonstration, watch the video below.

Though I don't have any concrete proof, I assume that my figure is named Winnetou, the Native American chief, originally marketed as part of the German 'Karl May' movie edition of the toys. These were distributed in other countries as part of the regular Big Jim / Kid Acero line with a  generic wild west theme and Winnetou being renamed Geronimo. 

Unlike most of the other Big Jim figures, Winnetou was one of the few characters, who sported a head full of hair, which, given the age of the toy, is still in perfect condition.

At any rate, having recently designed a basic leggings pattern for the Monster Highs, I adapted the pattern for Big Jim action figures and knitted Winnetou (and friends) a few pairs of boxer shorts. Winnetou seems pleased and my boxer short pattern can be found below.

Big Jim Action figure (by Mattel) in hand knitted boxer shorts (by me)

Big Jim Action figure (by Mattel) in hand knitted boxer shorts (by me) 

Free Big Jim Action Figure Boxer Shorts Knitting Pattern

Knitted seamlessly from the waist down, this pattern gives you the chance to check whilst knitting to ensure a snug fit; and the length of the boxer shorts  can obviously be adjusted as you go. 

Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts

Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts

Knitted on 2.5mm to 3mm needles, the pattern is suitable for all types of sock yarn. For  the  boxer shorts in the images, I used Madelinetosh Tosh Merino Light (Victorian Gothic - for the dark purple pants) and Araucania Botany Lace for the pink and multi-coloured versions.

Materials and Tools

• app 5 - 10g of: 4 ply Sock Yarn 

• 2 - 3mm Double-Pointed Needles 

• 4 Stitch Markers

• Scissors

• Safety Pin x2 or Scrap Yarn (in contrasting colour)

• Darning Needle, Sewing Needle or Crochet Hook (for sewing in ends)

Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts

Instructions

Cast on 30 stitches.

Row 1: k1, p1 to end of row.

Row 2 - 5: Divide stitches evenly on 3 double-pointed needles and join in the round, placing a stitch marker at the beginning of the round. Continue in k1, p1 ribbing for another 4 rounds.

Waist Increases: 

Row 6: SM (slip marker), k1, PM (place marker), kfb, k11, kfb, pm, k1, pm, kfb, k to last stitch, kfb (34 stitches)

Row 7 - 11: Repeat above increase row five times in stockinette stitch, knitting in the front and back of each stitch directly before and after each marker until the stitch count totals 54 stitches.

Dividing for the legs

Removing markers, at the beginning of the next round place the first 27 stitches onto waste yarn. 

Join the remainder of the stitches in the round, placing a marker at the beginning of the new round.

Row 12: sm, kfb, knit to last stitch, kfb (29 stitches)

Continue knitting in stockinette stitch for 11 rounds and bind-off or continue knitting until piece has reached the desired length.

Proceed to knit the second leg, dividing stitches held on scrap yarn evenly on three double-pointed needles. Using the m1 increase method, pick up 1 stitch at the beginning and at the end of the round to ensure a closed up seam. Mark the beginning of the round and start knitting the second leg, following the instructions above. 

Weave in all ends, block and enjoy!

For my other doll knitting patterns, please visit this link.

Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts

Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts

Big Jim Action figure Winnetou (by Mattel) and his haul of hand-knitted boxer shorts

Should you require pattern support, please feel free to contact me via Ravelry, Twitter, by e-mail or leave a comment below.

This pattern is for personal use only and may not be reproduced for commercial purposes without permission. Neither may you sell any items made from the directions in this pattern.

© 2019 Clarice Asquith. All rights reserved. http://makedoandmendnovice.blogspot.com

Free Pattern: Knitted Leggings for Monster High Dolls

Free Monster High Leggings Pattern 

The Monsters were in need of some new clothes, and I decided it was time to make a few knitted leggings / pants.

This pattern is for  Monster High dolls, measuring approximately 26cm in height. Knitted seamlessly from the waist down, it gives you the chance to check whilst knitting to ensure a snug fit; and the length of the leggings can obviously be adjusted as you go. 

Monster High Doll Free Knit Leggings Pattern

Knitted on 2.5mm to 3mm needles, the pattern is suitable for all types of sock yarn. For the leggings below, I used Madelinetosh Tosh Merino Light (Victorian Gothic) and Araucania Botany Lace. 

Monster High Doll Free Knit Leggings Pattern

As you can see in the images, two of the Monsters are wearing a light green, fluffy jumper and OOAK wigs made from brushed acrylic yarn. The pattern for the jumper is available here, and instructions on how I make my doll yarn wigs can be found here and here. All of my other Monster High projects are available via this link.

Monster High Doll Free Knit Leggings Pattern

Without further ado, here is my knitting pattern for the knitted leggings: 

Monster High Doll Leggings

Pattern Notes

Materials and Tools

• app 5 - 10g of: 4 ply Sock Yarn 

• 2 - 3mm Double-Pointed Needles 

• 4 Stitch Markers

• Scissors

• Safety Pin x2 or Scrap Yarn (in contrasting colour)

• Darning Needle, Sewing Needle or Crochet Hook (for sewing in ends)

Knitted Leggings for Monster High Dolls - Preview of New Pattern

Monster High Knitted Leggings

New Free Monster High Knitting Pattern Preview

I have been busy knitting leggings for the Monster Highs dolls. The leggings are knitted seamlessly from the top down and the size can be adapted whilst knitting, ensuring a snug fit. I'm hoping to release the free pattern on the blog in the next few days. 

Until then, here is a little preview.

Finished Monster High Yarn Wig Projects

I have been busy creating yarn wigs from brushed acrylic yarn for Monster High Dolls and my instructions on how to make these are available here and here. 

As already mentioned in my previous posts, brushing out acrylic yarn creates a lot of waste. To minimise this waste, I wanted to experiment and make a wig, incorporating wefts made out of the waste acrylic.

When I recently completed another wig, I essentially followed the same steps, but utilised some of the brushed out waste acrylic yarn in the lower layers of the wig. Looking at the finished wig (photos below), I am quite pleased with the result. Whilst these 'waste wefts' are certainly not suitable for the top layers of the wig, they make for nice padding and add overall bulk to the appearance of the wig. 

Here are some images of my waste yarn wig: 

Monster High Wig (made from acrylic yarn, incorporating wefts made from waste acrylic yarn) 

Monster High Wig (made from acrylic yarn, incorporating wefts made from waste acrylic yarn) 

Monster High Wig (made from acrylic yarn, incorporating wefts made from waste acrylic yarn) 

Monster High Wig (made from acrylic yarn, incorporating wefts made from waste acrylic yarn) 

Doll Customising: Easy Beginner Projects - Acrylic Yarn Wigs

Getting Into Doll Customising 

Regular readers of my blog will have noticed that I have been busy creating a number of custom outfits for Monster High and other dolls over the past months. I have to confess, by now my interest in doll customisation has become a bit of an obsession, judging by the time I spend marvelling at the many fantastic custom creations available on the web. 

Though I have been aware of the existence of custom or ooak (one of a kind) dolls for a number of years, especially since many Blythe doll collectors roaming the craft scene are very accomplished knitters and crocheters. Yet, I didn't feel confident enough to launch into my own custom projects for a long time. 

What's more, doll customising sounds like a bit of an obscure past time, especially for grown-ups. For this reason, I felt reluctant to admit to myself that I actually felt intrigued by it. So intrigued in fact, that I would want to give it a go myself.

Despite its growth over the past decade thanks to social media platforms such as Tumblr, Pinterest and Youtube, the community of doll customisers is still comparatively small and the number of  tutorials and readily available information on techniques, tools and materials is consequently rather limited, especially when compared to mainstream crafts such as sewing, knitting, or crocheting. Due to their familiarity with materials and tools in use by doll customisers, all those familiar with model-making are likely to have an advantage when branching into the custom doll sphere. For a knitter like me, doll customisation is entirely new territory.

Monster High Acrylic Yarn Doll Wig

Free Pattern - Picot Dress for Monster High Doll

As promised a little while ago, I have been busy designing another Monster High doll dress pattern. Originally, I just wanted to have a go at designing a jumper. I ended up knitting a few pieces before arriving at the final pattern and whilst working on the design, I got the idea to extend the jumper and made it into a dress, featuring a Picot border instead. Adding the Picot bind-off is optional and my pattern also gives you the option to knit a 2x2 ribbed yoke or work the yoke in plain stockinette stitch. 

For this project, I was playing around with different yarn options. The photographs show the dress knitted with both fingering weight mohair (Yeoman's Elsa, modelled by both Frankie and Madeline), 2ply dk weight (also Yeoman's) as well as 4ply sock yarn (Knitglobal). All of these yarn types are suitable without making any alterations to the pattern as such, but will give the finished dress a very different look and feel. 

Ever After High Cocktail Dress with Picot Border and Stockinette Yoke (Yarn Yeoman's 2 ply DK Weight)

The dress is designed for Monster High dolls approximately 25cm tall, but the design is also suitable for Ever After High Dolls, as is evidenced by Madeline. Please note the photos of the grey dress below show the dress unblocked. As soon as it's finished blocking, I will post an update with photos of the blocked dress and more in-depth information on my finishing techniques, including options for fastening the dress at the back.

Monster High Cocktail Dress with Picot Border and Stockinette Yoke (Yarn Yeoman's 2 ply DK Weight)

Monster High Cocktail Dress with Picot Border (Yarn Yeoman's 2 ply DK Weight)

Pattern Notes

Materials and Tools

• app 5 - 10g of: 4 ply Sock Yarn or 3 ply Mohair Fingering Weight or 2 ply DK Weight Yarn 

• 2 - 3mm Double-Pointed Needles 

• Scissors

• Safety Pin x2 

• Darning Needle or Sewing Needle (for sewing in ends) 

• For fastening the back of the dress: Button(s) / Hook and Eye Clap or Contrast Yarn